Deutsch
Deutsch
Dansk
English
Español
Français
Italiano
Nederlands
Norsk bokmål
Polski
Português
Română
Suomi
РусскийIt appears that your shopping cart is still empty
Tuning run | Tuning barrel | D12,7mm ...
tuning run | D12,7mm | T4e HDR-50 STEEL with thread + 3 variants | 20y+ | Parts Here...
tuning run | D12,7mm | T4e HDR-50 STEEL with thread + 3 variants | 20y+ | Individual parts Here you can purchase individual parts from the tuning barrel T4e HDR-50 STAHL. These are compatible with the SOLIDCORE RAM shop Lauf!! In connection with our Powerkit.50 an output of over 20 joules is achieved! Details: Extreme fitting tolerances Increased precision Diameter (internal) 12,7mm Muffler thread including reinforced spring Anti-twist attachment Length 10cm with additional thread protection cover...
5,65€ - 38,95€
Powerkit.50 for HDR50 | Export valve ...
Powerkit.50 for HDR50 | export valve | Maximum power 7,5j Version 20-30J Only with us will ...
Powerkit.50 for HDR50 | export valve | Maximum power 7,5j version 20-30J Only with us the 7,5J version is just as powerful as the open 11J version - real 20-30J. We looked at the 11J version and found the differences and can now offer you this kit. * Basically at least 16J+ are possible with our Powerkit.50. In order to be able to get a higher performance of 20-30J, it depends heavily on the ammunition you use and the right temp...
28,95€ - 47,95€
Tuning run | Tuning Barrel T4e HDR-50 ...
tuning run | HDR-50 STEEL with thread +2 attachments | 20J+ In connection with our Powerkit.50 w...
tuning run | HDR-50 STEEL with thread +2 attachments | 20J+ In connection with our Powerkit.50 an output of over 20 joules is achieved! Details | Improvement: Extreme fitting tolerances Increased precision Diameter (internal) 12,7mm Muffler thread incl. reinforced spring Anti-twist protection Attachment length 10cm with additional thread protection cover (now also made of steel) All three components are burnished Increased performance with further modification Very long service life Plug and ...
75,00€
Powerkit.50 for HDP50 | Export valve ...
Powerkit.50 for HDP50 | export valve | Maximum power 7,5j - 20j+ Details | Improvement: no v...
Powerkit.50 for HDP50 | export valve | Maximum power 7,5j - 20j+ Details | Improvement: no more valve needed in the pressure chamber High-strength special aluminum - press the insert into the pressure chamber with an enclosed screw and remove the valve (throttle in the pressure chamber) Increases the performance to over 20 joules!* longer valve opening time, larger gas volume, reduced cool Down effect valve pin made of stainless steel for better sliding and protection of the sealing ring Thanks to a...
28,95€ - 47,95€
Slugmaker Ammo6 | HDR50 | DIY cal.50 ...
Slugmaker Ammo6 | HDR 50 | first strike selection: Homedefence-24 Edition adapted to our run...
Slugmaker Ammo6 | HDR 50 | first strike Selection: Homedefence-24 Edition adapted to our barrel Ammo6 for the standard barrel and suitable for the SolidCore barrel Details | Improvement: flexible Ammo6 V9 spiral ammunition mold for 3 magazines (18 balls) ammunition tailored to the standard/tuning barrel Material: 2K high-temperature silicone, temperature stable up to 250 degrees no lubricant to produce the desired ammunition steel ball and hot glue / polyurethane / epoxy in the form...
39,95€
Powerkit.50 for HDR50 | Export valve ...
Powerkit.50 for HDR50 | export valve | Maximum power 11J * Basically at least 16J+ ...
Powerkit.50 for HDR50 | export valve | Maximum power 11J * Basically at least 16J+ are possible with our Powerkit.50. In order to be able to get a higher performance of 20-30J, it depends heavily on the ammunition you use and the right temperature! Details | Improvement: a valve is no longer required in the pressure chamber High-strength special aluminum - press the insert into the pressure chamber with an enclosed screw and remove the valve (throttle in the pressure chamber) ...
28,95€ - 47,95€
Tuning run | Tuning Barrel T4e HDP-50 ...
Tuning barrel T4e HDP-50 STEEL with thread + 3 variants Here you can buy individual parts from the tuning barrel T...
Tuning barrel T4e HDP-50 STEEL with thread + 3 variants Here you can purchase individual parts from the tuning barrel T4e HDR-50 STEEL. Details | Improvement: Extreme fitting tolerances, increased precision, silencer thread, anti-twist protection, performance increase with further modification very long service life Plug and Play with additional thread protection cover (short silencer see pictures) Sniper Extension Kit: Material: Steel, burnished Dimensions: 12cm long, thread (15x1) so it can a sound...
9,95€ - 36,95€
Slugmaker 50.26 | HDR50 | DIY hotglue ...
Slugmaker XXL | HDR 50 50.26 Scan the QR code to get the instructions for use. Details | ...
Slugmaker XXL | HDR 50 50.26 Scan the QR code to get the instructions for use. Details | Improvement: all outer bores are 12,50mm (ALU drum) e.g. Buckshot with steel balls all inner bores are 12,45mm (standard drum) Capacity has been increased to 26 floors Individual production of the bullets (e.g. hot glue with pointed etc.) ) high-quality pins made of steel to push out the finished hotglue slugs For a perfect result we recommend the shape with silver ...
39,95€
Tuning run | Tuning Barrel HDP-50 STA ...
Tuning run | HDP-50 STEEL with thread +2 attachments Details | Improvement: Extreme tolerance of fit ...
tuning run | HDP-50 STEEL with thread +2 attachments Details | Improvement: Extreme fitting tolerances, increased precision, silencer thread, anti-twist protection, increase in performance with further modification very long service life Plug and Play with additional thread protection cover (see pictures for short silencer) The purchase and ownership is free, the installation is prohibited in Germany due to the increase in performance and can lead to the loss of warranty claims. Do you have ...
70,00€
