Slugmaker - HomeDefence-24

Slugmaker

7 Article

Slugmaker Ammo6 | HDR50 | DIY cal.50 ...

Slugmaker Ammo6 | HDR 50 | first strike selection: Homedefence-24 Edition adapted to our run ...

Slugmaker Ammo6 | HDR 50 | first strike selection: Homedefence-24 Edition adapted to our barrel Ammo6 for the standard barrel and suitable for the SolidCore barrel Details | Improvement: flexible Ammo6 V9 spiral ammunition mold for 3 magazines (18 balls) ammunition adapted to the standard / tuning barrel Material: 2K high-temperature silicone, stable up to 250 degrees temperature no lubricant to produce the ammunition desired steel ball and hot glue / polyurethane / epoxy in the f ...

€ 39,95

Slugmaker 50.26 | HDR50 | DIY hotglue ...

Slugmaker XXL | HDR 50 50.26 Scan the QR code to get the instructions for use. Details | ...

Slugmaker XXL | HDR 50 50.26 Scan the QR code to get the instructions for use. Details | Improvement: all outer bores are 12,50mm (ALU drum) e.g. Buckshot with steel balls all inner bores are 12,45mm (standard drum) Capacity has been increased to 26 floors Individual production of the bullets (e.g. hot glue with pointed etc.) ) high-quality pins made of steel to push out the finished hotglue slugs For a perfect result we recommend the shape with silver ...

€ 39,95

Slugmaker Ammo6 + tuning drum Alumi ...

Slugmaker Ammo6 + aluminum tuning drum | HDR 50 selection: Homedefence-24 Edition at our ...

Slugmaker Ammo6 + aluminum tuning drum | HDR 50 selection: Homedefence-24 Edition adapted to our barrel + tuning drum or Ammo6 for the standard barrel & for the SolidCore barrel + tuning drum Create your individual ammunition and get the MAXIMUM POWER out in combination with our tuning drum! Recommendation: For best results we recommend the PUR (resin) cast resin / flexible, see link: Polyurethane cast resin (resin) and opaque color pastes according to RAL 350g | HP-FP Q ...

€ 60,90

Slugmaker 68.15 | Ammunition itself mac ...

Slugmaker 68.15 Scan the QR code to get the instructions for use. Details | Improvement:...

Slugmaker 68.15 Scan the QR code to get the instructions for use. Details | Improvement: capacity has been increased to 15 bullets Individual production of bullets (e.g. hot glue with tip, shot load as wing bullet etc.) high-quality pins made of steel for pushing out the finished hot glue slugs For a perfect result we recommend the mold with silicone Oil the spray and apply 2-3 mm of the hot glue over the form. Since the hotglue projectiles become smaller as they cool ...

€ 49,95

Slugmaker 50.26 + tuning drum aluminum ...

Slugmaker 50.26 + aluminum tuning drum | HDR 50 selection: Slugmaker 50.26 + tuning drum s ...

Slugmaker 50.26 + aluminum tuning drum | HDR 50 selection: Slugmaker 50.26 + tuning drum black or gold Create your individual ammunition and get the MAXIMUM POWER out in combination with our tuning drum! Quality: every component is checked for quality before shipping. Top seller with top ratings Made in Germany Do you have any questions or other concerns? Then feel free to contact us! See other auction for more interesting items for the HDR 50, HDS 68 and S ...

€ 60,90

Slugmaker Ammo6 | HDS | Magfed Guns | ...

Slugmaker Ammo6 | HDS | Magfed Guns | Cal. 68 Create your individual ammunition according to your ...

Slugmaker Ammo6 | HDS | Magfed Guns | Cal. 68 Create your individual ammunition according to your taste! Details | Improvement: flexible Ammo6 V9 spiral ammunition mold for 18 bullets, ammunition matched to the standard barrel diameter of the ammunition 17,4mm Material: 2K high temperature silicone, stable up to 250 degrees temperature no lubricant to produce the ammunition desired steel ball and hot glue / polyurethane / epoxy in give the shape and let it harden easily remove ...

€ 49,95

PUR (resin) cast resin | flexible | HP -...

PUR (resin) cast resin / flexible | HP-R15GB The PUR system R15GB-flex is a partially filled, low ...

PUR (resin) cast resin / flexible | HP-R15GB The R15GB-flex PUR system is a partially filled, low-viscosity 2-component combination of resin and hardener with a processing time of 5-10 min. optimal): 12 ° C - 20 ° C Technical data: Mixing ratio (parts by weight): 18 parts resin / 25 parts hardener Pot life (processing time): 100 - 30 min (5 g at 10 ° C) Final strength: ...

€ 13,90 - € 31,40